اسیلوسکوپ 100مگاهرتز 2کانال TEKTRONIX TBS-1102C

348,750,421 تومان
آماده ارسال
مقایسه
آیا قیمت مناسب‌تری سراغ دارید؟
بلیخیر
نقد و بررسی اجمالی

اسیلوسکوپ 100مگاهرتز 2کانال TEKTRONIX TBS-1102C

اسیلوسکوپ 100مگاهرتز 2کانال TEKTRONIX TBS-1102C

 

شخصات :

  • پهنای باند : 100 مگاهرتز
  • تعداد کانال : 2 
  • سرعت نمونه برداری : 2GS/s
  • طول ثبت وقایع : 2.5k points
  • فانکشن FFT
  • 16 نوع اندازه گیری اتوماتیک
  • 10 حافظه داخلی
  • ارتباط با پرینتر بدون نیاز به PC
  • قابل اتصال بهPC با پورت USB
  • USB Flash
  • مونتاژ :  چین

Specifications

Model overview

Parameters TBS1052C TBS1072C TBS1102C TBS1202C
Bandwidth 50 MHz 70 MHz 100 MHz 200 MHz
Channels 2 2 2 2
Sample Rate 1 GS/s 1 GS/s 1 GS/s 1 GS/s
Record Length 20 K points 20 K points 20 K points 20 K points

Vertical system – Analog channels

Vertical resolution
8 bits

 

Input sensitivity range
1 mV/div to  10 V/div max. in 1-2-5 sequence with probe attenuation set to 1X

 

DC gain accuracy
±3.0 % step gain, derated at 0.1 %/°C above 30 °C

 

Maximum Input Voltage
300 VRMS, Installation Category II; derate above 4 MHz at 20 dB per decade to 200 MHz

 

Offset range
1 mV/div to 50 mV/div: ± 1 V

100 mV/div to 500 mV/div: ± 10 V

1 V/div to 5 V/div : ± 100 V

 

Bandwidth limit
20 MHz (Typ)

 

Input coupling
DC, AC

 

Input impedance
1 MΩ ±2 % in parallel with 14 pF ±2 pF

 

Vertical zoom
Vertically expand or compress a live or stopped waveform

 

Acquisition modes
Sample
Acquire sampled values
Peak Detect
Captures glitches as narrow as 4 nsec at all sweep speeds.
Average
From 2 to 256 waveforms included in average.
Hi-Resolution
Averages multiple sample of one acquisition interval into one waveform point.
Roll
Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div

Horizontal system – Analog channels

Timebase accuracy
±25 x 10-6 over any >1 ms interval
Timebase range
TBS1202C, TBS1052C, TBS1072C, TBS1102C
2 ns/div to 100 sec/div in a 1-2-4 sequence

 

Horizontal zoom
Horizontally expand or compress a live or stopped waveform

 

Deskew range
± 100 nsec

 

Trigger system

External trigger input
Included on all models

 

Trigger modes
Auto, Normal, Single Sequence

 

Trigger Types
Edge
Positive or negative slope on any channel. Coupling includes DC, HF reject, LF reject, and noise reject.
Pulse Width
Trigger on width of positive or negative pulses that are >, <, =, or ≠ a specified period of time.
Runt
Trigger on a pulse that crosses one threshold but fails to cross a second threshold before crossing the first again.
Trigger source
CH1, CH2, AUX IN, AC Line

 

Trigger Coupling
DC, Noise Reject, High Frequency Reject, Low Frequency Reject

 

Trigger signal frequency readout
Provides a frequency readout of the trigger source up to instrument bandwidth.

 

Waveform measurements

Cursors
Time, Amplitude, Screen

 

Automated measurements
32, of which up to six can be displayed on-screen at any one time. Measurements include: Period, Frequency, Rise Time, Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive Overshoot, Negative Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle RMS, Positive Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area, Cycle Area, Delay FR, Delay FF, Delay FR, and Delay RR.

 

Gating
Isolate the specific occurrence within an acquisition to take measurements on, using either the screen, between waveform cursors or full record length.

 

Waveform math

Arithmetic
Add, Subtract, and Multiply waveforms

 

FFT
Spectral magnitude. Set FFT Vertical Scale to Linear RMS or dBV RMS, and FFT Window to Rectangular, Hamming, Hanning, or Blackman-Harris.

 

Display system

Display Type
7-inch TFT Color Display

 

Display Resolution
800 horizontal by 480 vertical displayed pixels (WVGA)

 

Waveform styles
Vectors, Variable persistence, and Infinite persistence.

 

Format
YT and XY

 

Input Output Ports

USB 2.0 Host Port
Supports USB mass storage devices

 

USB 2.0 device port
Rear-panel connector allows for communication/control of oscilloscope through USBTMC or GPIB with a TEK-USB-488

 

Probe Compensator
Amplitude
5 V
Frequency
1 KHz
Kensington Style Lock
Rear-panel security slot connects to standard Kensington style lock

 

Power source

Power source
100 to 240 VAC RMS ±10%

 

Power source frequency
45 Hz to 65 Hz (100 to 240 V)
360 Hz to 440 Hz (100 to 132 V)

 

Power consumption
30 W maximum

 

Physical characteristics

Dimensions
Parameters mm in.
Height 154.95 6.1
Width 325.12 12.8
Depth 106.68  4.2

 

Shipping dimensions
Parameters mm in.
Height 266.7 10.5
Width 476.2 18.75
Depth 228.6 9.0

 

Weight
Parameters kg lb
Instrument only 1.979 4.36
Instrument with accessories 2.2 4.9

 

Cooling Clearance
50 mm (2 in) required on left side, right side, and rear of instrument.

 

Environmental and safety

Temperature
Operating
0 ºC  to +50 ºC
Non-operating
–30 ºC  to +71 ºC

 

Humidity
Operating
5% to 90% relative humidity (% RH) at up to +30 °C,
5% to 60% RH above +30 °C up to +50 °C,
non-condensing.
Non-operating
5% to 90% RH (Relative Humidity) at up to +30 °C,
5% to 60% RH above +30 °C up to +60 °C,
non-condensing.
Altitude
Operating
Up to 3,000 m (9,842 ft.)
Non-operating
Up to 12,000 meters (39,370 ft).
Regulatory
Electromagnetic compatibility
EC Council Directive 2014/30/EU
UL61010-1, UL61010-2-030, CAN/CSA-C22.2 No. 61010.1, CAN/CSA-C22.2 No. 61010-2:030; EN61010-1, EN61010-2-030
Safety
Complies with the Low Voltage Directive 2014/35/EU for Product Safety
مشخصات کلی
سایر مشخصات
گارانتی

1 سال گارانتی و 10 سال خدمات پس از فروش شرکتی

دیدگاه کاربران
دیدگاهها0
  • جدیدترین
  • مفیدترین
  • دیدگاه خریداران

هیچ دیدگاهی برای این محصول نوشته نشده است.

5
4
3
2
1
0.0

بر اساس 0 دیدگاه

نظر خود را در مورد این محصول بنویسید ... افزودن دیدگاه
پرسش و پاسخ
  • هنوز پرسشی ثبت نشده است.

شما هم درباره این کالا پرسش ثبت کنید ثبت پرسش جدید
نقد و بررسی